20 Years of Experience

  • Proven dust measurement principle
  • Flexible, modular platform
  • Solutions oriented

Global Distribution Network

Applications Experts

  • Heavy Industry
  • Food Manufacturing
  • Pharmaceutical

Dust. The unavoidable nuisance More often than not, dust control in today’s industry is well handled and when everything is working as it should, dust levels are at acceptable levels. Unexpected events are also a part of everyday life in industry and when handling bulk and powders these unexpected events often cause undesired dust clouds. These undesired dust clouds will usually have site specific consequences. Regardless of the industry handling bulk and powder, dust seems to be the single most common headache. The reason why to measure dust will vary a lot depending on the variables of the type of dust. Five very different examples of why to monitor for dust Health and Hygiene: The inhalation of most any kind of dust is very bad and often hazardous to health. Employers around the world should be doing their best to quickly be able to react quickly to unexpected dust events. Proof of compliance: In most countries globally, stack and emissions monitoring has been regulated so companies are forced to abide. However, what about all of the secondary emission sources? We are seeing that more and more often; regulators want to see proof that companies are monitoring their secondary sources. Unwanted dust accumulation: the dark corners of the plant often get the least amount of attention and often are not under the radar of operators. What about the dust accumulating? In some cases, it’s a great party for rodents, bugs or microbiological organisms. In other cases, if accumulated dusts were to disperse into the air and combust, the consequences could be fatal. Fugitive dust: The dispersion of dust into the local vicinity is often a cause for conflict between plant owners and the public. In one case the owner of the very expensive yacht becomes extremely annoyed to find a coating of dust on his much cherished yacht. In another case, the plant owner finds that his fine metal dust and the light of rain damaged the paint of all the cars in the nearby parking lot –giving them an expensive new project of repainting the cars. Hazardous location supervision: All companies handling explosive dust understand the tedious task of area classification. Nevertheless, by installing continuous dust detectors, they can prove they made the right decision and it will also give the information to change if necessary. Read the whole article here. Read more »



Come visit us at POWTECH 9-11.4.2019. Our booth is at hall 4 / 4-157. We are introducing our new products the S200 and S300 line at our booth! POWTECH is held in Nuremberg Germany and it is the world´s leading trade fare for processing, analysis and handling of powder and bulk solids. Read more »

Sintrol's first thermal cameras Vulcan12-2C and Vulcan12MP are designed to monitor temperature and combustion process of lime kilns and recovery boilers. The cameras are part of Sintrol's new product concept and branding that will expand to other products produced by Sintrol. Sintrol Vulcan12-2C is specially designed for the conditions in which the flame itself is to be seen and which has no ash and soot in sight. Read more about the Sintrol Vulcan12-2C here. Sintrol Vulcan12MP optimized infrared radiation system, in turn, is specifically designed to be seen through flames and smoke. Read more about Sintrol Vulcan12MP here.   Contact us for more information about the cameras and we will figure out the right solution for you!   Read more »

Sintrol Dumo dust monitor for mining ad Featured in World Mining Frontiers magazine – Manage Your Dust on All Levels

Read more »