Kysy lisätietoja tuotteesta
  1. Name(*)
    Pakollinen tieto!
  2. Company
    Invalid Input
  3. Phone
    Pakollinen tieto!
  4. Email(*)
    Pakollinen tieto!
  5. Message(*)
    Pakollinen tieto!
« Back to product listing
Logo Array

Snifter A2

Dust monitor for broken bag detection

Snifter A2 is an advanced filter leak detector. This dust monitor can be used to monitor the operation of a baghouse and alarm the operator when dust levels increase. Snifter A2 supports Sintrol Network connectivity over USB and RS485 interfaces by default. All parameters and settings are user selectable to best suit custom application needs. This device is fully compatible with Sintrol DustTool software.

Auto setup function makes commissioning easy and quick and two independent alarm signals enable easy connectivity.

EX models (IECEx and ATEX) available.
Wireless RF communication available.

Snifter A2

Measurement Objects              

 Solid particles in a gas flow           

Particle Size

 0.3 µm or larger

Measurement Range

 From 0.1 mg/m³

Measurement Principle

 Inductive Electrification

Protection Category

 IP65

Sensor Length (total/measuring)

 250 mm /185 mm  ı   9.8" / 7.3"

Power Supply 

 12 - 24 VDC

Power Consumption

 3 W

Cable Connection

 2 meter cable, 10 wires  ı  6.5 ft cable, 10 wires

Process Connection

 - NPT 1/2 " male thread

 - NPT 1/2 " female thread welding socket (optional)

Output Signal 

 - Two output signals (100 - 280 mA) depending on operation  temperature

Communication Interface           

- Serial communication RS-485
- USB communication
- Wireless communication (optional)

Communication Protocol

 - Modbus RTU, (RS-485)
 - SNT network, (USB, RF, RS-485)

Alarm Settings

 - Automatic
      Alert: 5 x normal dust level
      Alarm: 20 x normal dust level
- User selectable ranges

Signal Damping time

 - Fixed at factory: 100 s
 - Adjustable from 0 - 6000 s

Process Conditions

Temperature                            

 Max 250 °C  ı  Max 482 °F                                     

Pressure

 Max 200 kPa

Gas Velocity

 Min 3 m/s  ı  Min 9.8 ft/s

Humidity

 Max 95% RH (non-condensing)

Ambient Conditions

Temperature

- Starting -20 to +40°C  ı  -4 to 104 °F
- Running -40 to +60°C  ı  -40 to 140 °F                   

Humidity

 Max 95 % RH (non-condensing)

Materials and Weight

Probe (wetted part)                     

 Stainless steel (AISI 316L)                         

Process Connection (wetted part)

 Stainless steel (AISI 316L)

Enclosure

 Aluminum

Probe Insulation (wetted part)

 PEEK

Weight

 0.7 kg  ı  1.5 lbs

CLOSER DETAILS AS PDF-FILES

Snifter_general_brochure Download file »